Skip to main content 1-1/2" OFFSET PIVOTS
- All offset pivot sets are handed
- The pivot point of an 1 1/2" offset pivot is 3/4" (19.1)mm from the heel and 1" 1/2 (38.1)mm from the face of the door
- 1 1/2" offset pivots allow additional clearance to accept various trim conditions
- 1 1/2" offset pivots allow fascia to be applied to the face of a standard 1 3/4" (44.5)mm door
- Door edges must be beveled 1/8" (3.2)mm for every 2" (50.8)mm of door thickness
- Offset pivots allow the door to be weathertight at both sides and the top using the stops
